Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 5340e Menu Settings

Status
Not open for further replies.

jabbo99

Technical User
Nov 4, 2013
957
US
I have several Mitel 5340e IP sets. I'm able to adjust the brightness and contrast on all but one by pushing the Menu/Settings key, then choosing Brightness/Contrast. However, the Menu/Setting key does not work on the one phone. I've researched and discovered that by pushing either the arrow up or down key repeatedly, you can gain access to the Menu/Settings of the phone. This did not work. Thanks!
 
Find a spare key. Call it "Settings". Make "Line Type" "Phone App". Make "Phone App Feature" "Settings". This key will act as the blue key now.

Always look out for the next guy because it may be you!
 
SX200?

If so, probably an issue with the TFTP bootload not avail during bootup

**********************************************
What's most important is that you realise ... There is no spoon.
 
@ jrgood0852 I went into opt 9 Desktop Device Assignments, expanded the extension of the problematic set(101), and found a spare key. None of the options you mentioned are available.

@ kwbMitel, this problem is only affecting one phone 5340e out of several.
 
@ jrgood0852 I went into opt 9 Desktop Device Assignments, expanded the extension of the problematic set(101), and found a spare key. None of the options you mentioned are available.

@ kwbMitel, this problem is only affecting one phone 5340e out of several.
 
Sorry, crich.........I thought it was a 3300. I guess it won't work for you. I don't know the other system. Thanks.

Always look out for the next guy because it may be you!
 
No worries jrgood. Thanks for the feedback
 
Observe the phone during bootup and see if the tftp load fails. This can affect only 1 phone.

The fix is to upgrade to the latest release 5.0.2.12

**********************************************
What's most important is that you realise ... There is no spoon.
 
A crazy thing is I have not a clue how I got the 911 to alarm the console.
 
@ kwbMitel, you're saying that to fix just one 5340e set, I must upgrade the software of the sx200 to 5.0.2.12? Seems like overkill for one phone.
 
The issue will affect any future phones as well

It is odd that any are working at all

**********************************************
What's most important is that you realise ... There is no spoon.
 
I went to a 5340e phone and checked the "About" settings and found this info:

Release 5.2
Load: 05.02.01.07
Harware Rev: A:01
ICP Rev: 200_ICP_5.0.2.3

I found the new software(5.0.2.12) on MOL for the system but not the SX200ICP_SETUP.EXE file. I do not have the software CD and I'm having no luck locating that file on MOL. Suggestions?

Thanks

 
kwbMitel,
A few corrections to my previous posts. The problematic phones were not 5340e. I've been able to pull up the menu settings on that model the entire time The problem occured on the 5330e models. I performed the SW upgrade and it resolved the problem. I'm now able to pull up the menu settings on the 5330e models.

Thanks for all of your assistance!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top