Mitel 3300 WAN Port for remote access

[braindead2]

Can anyone help, I'm trying to setup the Mitel 3300 for remote access via DSL on the WAN Port.

I have setup the Mitel WAN port for a static address in the DSL router IP range, and setup port forwarding on the PPTP port number 1723. I have programmed PPTP form with the username/password and to give me a IP adddress back in the same subnet as the 3300 which is on default 192.168.1.2

The VPN works and the system returns the IP address 192.168.1.251 as programed in the PPTP form. However, I cant access the 3300 on 192.168.1.2. I can ping the L2 switch on 192.168.1.1 but thats about it.

Really need a break as its driving me nuts!!!

 

[Supernova99]

You are correct
I have had this issue from home when trying to access a customers 3300 via a VPN connection
My home subnet was simular to the customer network and I had all sorts of issues
Since then I have made my home network unique so that it will not clash with any customer that I might access via VPN

Share what you know - Learn what you don't