Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel 3300 UCC Licensing

Status
Not open for further replies.

jordans999

Technical User
Apr 11, 2014
11
CA
Hello,

I am new to UCC licensing.
With UCC licensing, do we program the user as Multi device user?
How can I assign a user with the UCC entry licensing or Standard licensing or premium licensing?


Thanks
 
Yes multidevice type

The type of UCC license only impacts what applications are also enabled, all are the same with respect to
Ghe MCD

**********************************************
What's most important is that you realise ... There is no spoon.
 
Hi kwbMitel,

so, I guess UCC license can only be programmed as multidevice type only? And not MCD user, as it uses IP device license?
If we are to program a new user, do we program it from MAS server or PBX?

Thanks
 
We have always used mas with single point provisioning for these

For premium users it will configure
the MDU group with an EHDu for Twinning to mobile and a Sip softphone
A UCA acount with all of the above including the smart device license so that the sip softphone can be used

For standard users it will configure
the MDU group with an EHDu for Twinning to mobile and a Sip softphone
A UCA acount with all of the above BUT NO SMART DEVICE LICENSE

On our site we also had ACD agents , these had to be configured the old way with normal User licnenses


If I never did anything I'd never done before , I'd never do anything.....
 
>>I guess UCC license can only be programmed as multidevice type only?

Correct

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top