Mitel 3300 System - 10 Digit Local Dialing

[Samalie]

Hi everyone...

My phone company is making the switch to 10-digit local dialing as of December 1st, however I have been completely unable to find where this gets programmed in my Mitel 3300 system.

Any help/pointers in the right location would be greatly appreciated

 

[kwbMitel]

ARS Digits Dialled.

Currently you will have enties like: (but not necessarily exactly like:

2 with 6 digits to follow going Route X
3 with 6 digits to follow going Route X
4 with 6 digits to follow going Route X
.
.
.
etc

Maybe
NNX With 4 digits to follow going route X

If your local area code is 222 you would add:

222 with 7 digits to follow going route X

Yes it is a simple as that.


**********************************************
What's most important is that you realise ... There is no spoon.

 

[DoubleUT]

That should be in the ARS Digit Dailing. Any reference to outside line access digit should be followed by a total of 10 digits as the access digit is normally stripped.

 

[Samalie]

Thank you very much for your assistance