Mitel 3300 MXe System Admin Problems

[Warrenator]

Good Morning/afternoon/evening <Delete where applicable>

I have a Mitel 3300 MXe system, which is not working as expected. When system administration is launched after login, the system the normal screen but with no feature selection (along the left) - at this point my browser gives me a "192.11.11.2 is not responding" message.

I have tried several re boots, none of which has cleared the problem.

I have a putty connection open, so can provide info from there if needed.

Any suggestions would be greatly appreciated, thanks.

 

[wireman50]

Try clearing your browser cahce....

 

[LoopyLou]

What browser? If IE what version?

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[Warrenator]

Cache cleared, didn't do anything.

IE9, same config as many other systems have worked fine on.

 

[Rockza]

I still use IE 8 to connect to controllers. I have seen many weird things from 9.
Try 8 or Firefox with IE tabs.

Ian

 

[LoopyLou]

Don't think IE 9 is supported on all loads. Can you try a different laptop or PC to make sure its not a setting in yours?

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.