Mitel 3300 CXI Port Mirror

[calal]

Hi Guys,

Can anyone tell me how to do Port Mirroring on a 3300 CXi runnig MCD4.0. I know u can do this ons Release 9, but cant get it on MCD.

tanx

 

[kwbMitel]

These are the notes I have on the subject. I do not know if they are release specific.

How to mirror the LAN port on a CXi

Body/Solutions
The CXi can mirror LAN ports for ethereal capture. The commands to enable port mirroring are:

mipsdb_debug 51, “destination_port source_port”
mipsdb_debug 51, “ 3 4 5 6 7” i.e. port 4 to 7 are mirrored to 3


The command to disable the mirroring is:

mipsdb_debug 50

Note:
These commands do not survive a reboot. If the CXi reboots, you will have to reinitialize the mirroring.

Also, please note that when the mirroring is enabled, the port that is doing the mirroring cannot be used for any other purposes.


**********************************************
What's most important is that you realise ... There is no spoon.

 

[calal]

HI,

I found the same doc on MOL, but it doesn's seem to work on MCD 4. Could u get it to work??

 

[kwbMitel]

I tried this on a Rel 4.0 and it worked just fine.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[kwbMitel]

The commands must include the "quotes" when entered on the maint port. Did you do this?

**********************************************
What's most important is that you realise ... There is no spoon.