Mitel 3300 - all buttons dial 0?

[stickymicky27]

Hello,

I have been asked if you can make 1 phone i.e. reception room phone dial 0 if any number key is pressed... this is something i have never been asked before but was wondering if it can be done...

I realise that you could use digit modification but if i do this on numbers 5 or 9 this will stop all others phones in the office from dialing out or ringing voicemail (500)

Please let me know your thoughts...

Regards

 

[Supernova99]

Make the phone a HotLine extn and point this to 0
then as soon as you go off hook it will dial 0

Share what you know - Learn what you don't

 

[kwbMitel]

hotline programming is done using the Associated DN form.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[stickymicky27]

Um... so if i configure it as a hotline but then also program it so that it can only dial inside extensions it might do what i want it to...

Cheers for the help!

 

[Supernova99]

No once it is a hotline extn it can only call the associated extn number
You will still be able to call this extn.

Can you not lock the extn down via COR/COS etc and provide labelled speedcall buttons for users to call?

Share what you know - Learn what you don't