Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Miran Card Recording

Status
Not open for further replies.

bobby105

Vendor
Sep 21, 2010
24
US
We have an Option 11 C from Nortel that was installed in 2001. We never changed the Miran card recording nor wanted too until now. Currently, we are stuck at appying the right access codes to gain access to the Miran card. Please help!!!
 
There are three types of Miran card. Version 1,2 and 3. We don't normally give out passwords, but they don't usually ever get changed from default. Miran 1 and 2 could be accessed via the LSL link if the card was in the main cabinet. Otherwise it was a case of hooking up a serial port cable at 9600 etc.

Miran 2 and 3 could also be accessible via the LAN. What version do you have?

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
You have to access the TUI to record, that's the only way unless you import wave files.
 
Firebirdscrambler: We are accessing the Miran card my the digital telephone line. The Miran part number is NTAG36AC.
 
It sounds as if you have either the Miran 1 or 2 version. I have a good PDF file on how to administer the Miran card is you need it. Just follow my link below.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
When we dial the access code for the trunk unit 7 ((TRK)(DID LDR DDL)), we received a busy signal. Below is the trunk and route information.

DES FIRST RAN
TN 003 0 00 01
TYPE RAN
CUST 0
XTRK EXUT
TIMP 600
BIMP 600
AUTO_BIMP NO
RTMB 8 1
DATE 23 OCT 2001

DES SECOND RAN
TN 003 0 00 02
TYPE RAN
CUST 0
XTRK EXUT
TIMP 600
BIMP 600
AUTO_BIMP NO
RTMB 9 1
DATE 23 OCT 2001

DES MIRAN
TN 003 0 00 07
TYPE DID
CDEN 8D
CUST 0
XTRK EXUT
FWTM NO
TIMP 600
BIMP 3COM
AUTO_BIMP NO
TRK ANLG
NCOS 0
RTMB 15 1
NITE
SIGL LDR
STRI/STRO DDL DDL
SUPN YES
AST NO
IAPG 0
CLS UNR DIP CND WTA LPR APN THFD
P10 NTC LOL
TKID
DATE 9 NOV 2001

REQ: stat 3

00 = UNIT 00 = UNEQ
01 = UNIT 01 = IDLE (TRK)(RAN AUD)
02 = UNIT 02 = IDLE (TRK)(RAN AUD)
03 = UNIT 03 = UNEQ
04 = UNIT 04 = UNEQ
05 = UNIT 05 = UNEQ
06 = UNIT 06 = UNEQ
07 = UNIT 07 = IDLE (TRK)(DID LDR DDL

TYPE RDB
CUST 00
DMOD
ROUT 15
DES MIRAN
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
DTRK NO
PTYP ACO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7015
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
CCO NO
MUS NO
MR NO
RACD NO
MANO YES
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0


PAGE 002

FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO
 
On your Rt 15, change the TARG value to = 0

Your FRL values do not look right either.

To access the Miran you would then dial 7015 from an extension.
 
Actually you can dial the ACOD for a RAN Rt.... thats how I get my users to verify the announcements.

My money is on TARG / TGAR values.


 
For the MIRAN TUI DID Trunk (TN 3 7), try changing STRI/STRO from DDL to IMM. Per MIRAN manual,"Do not program MUS or DID trunks as Delayed Dial (DDL)."

==================================
<INSERT SIGNATURE HERE>
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top