Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mics to a bcm 450

Status
Not open for further replies.
aburd

aburd

Vendor
Jun 11, 2003
10
US
Want the two to be able to talk to each other. I have a pri setup on each and a long patch cord,is that all i need? Thanks in advance
 
Sort by date Sort by votes
You'll need a crossover T1 cable. It's best if the 2 systems have different numbering plans. For example, 2xxx on one and 3xxx on the other. You'll need to setup routing with destination codes to call between the systems, and target lines to receive calls at each end.

Brian Cox
Oregon Phone
 
Upvote 0 Downvote
One more question about the mics side. This will be the second pri on it, the first is for dial tone. When i go in and program it up is says clear lines. It won't clear my target lines will it. Thanks,
 
Upvote 0 Downvote
yes it will on the pbx you are programming

WORK SMART NOT HARD
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
206
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
328
curlycord
curlycord
RedMaligator
  • Locked
  • Question
Nortel MICS connected to Call Pilot
Replies
10
Views
240
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Norstar MICS Extension Call Forward External 4
Replies
12
Views
239
ttEstiNg2023
ttEstiNg2023
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
635
Nortel dino
N

Part and Inventory Search

Sponsor

Back
Top