Hello, I have a system that has usa-xc 6.1 version that reads as follows
A0600007 2003/06/18
NT7BG8CB Rel 01
USA-MICS - XC 6.1 FC
Made in canada 2004/12
I order the latest xc 6.1 maintance release and the one they send me reads as follows
A0999975 2004/01/12
NT7B66CC Rel 01 0003
MICS-6.1 XC
Made in canada 2005/07
my questions are
1.would I have any problems when I put the new software...since once reads usa-mics xc 6.1 and the other just reads mics xc 6.1, should both be usa version, so all my programming stays as it is.
2.can anyone confirm that this software I order is the maintance release version of xc 6.1, the vendor says it is but I just want to make sure, since I did not see MR on the label.
Thanks
A0600007 2003/06/18
NT7BG8CB Rel 01
USA-MICS - XC 6.1 FC
Made in canada 2004/12
I order the latest xc 6.1 maintance release and the one they send me reads as follows
A0999975 2004/01/12
NT7B66CC Rel 01 0003
MICS-6.1 XC
Made in canada 2005/07
my questions are
1.would I have any problems when I put the new software...since once reads usa-mics xc 6.1 and the other just reads mics xc 6.1, should both be usa version, so all my programming stays as it is.
2.can anyone confirm that this software I order is the maintance release version of xc 6.1, the vendor says it is but I just want to make sure, since I did not see MR on the label.
Thanks