Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MICS in maintenance 2
- Thread starter jonsjacks
- Start date
- Thread starter
- #3
-
1
- #4
phoneguy427
Technical User
Sounds like it had an expansion in it, and it was removed. Either put an expansion card back in, or short out the capacitor, or connect a phone to each port one at a time until you find the alarm set, that will give you the option to perform a cold start.
-
1
- #5
number1telecom
Vendor
This can happen when you pull out the fiber expansion cards so if you have those laying around try putting 1 or 2 of them back in. Otherwise like stated above, short the capacitor.
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question