MICS 4.1 <--> Asterisk - necessary hardware

[diffeo]

We are planning on linking a system running Asterisk with a Digium 1TE133F to a Nortel NorStar MICS system running 4.1. We believe we need a "Nortel Norstar NT7B74 T1-PRI DTI Card" and a "Nortel Norstar Service Cartrige NTBB24GA", is this correct? Do we also need a software key to get the T1 card going?

 

[norstarboy125]

If your linking to the Norstar via a T1 then yes you will need a DTI card, Service card, or Combo card. You only need a keycode if your activating a PRI.

Charm City Communications

http://www.charmcitycommunications.com

 

[diffeo]

I guess I will need a keycode since I'll need PRI signalling to get calls back and forth between the Asterisk system and the NorStar via the T1 crossover. The thing I'm worried about is finding a reliable provider for the keycode. I don't want to be stuck with a code I can't activate.

 

[curlycord]

Buy from someone who can activated for you.



=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca