All,
Still trying to figure out for last three weeks to get this T88V and cash drawer working on OPOS driver for micros 3700 5.4.
So far here is the progress:
The printer is on COM2.
The drawer is on back of printer connected to DK port.
POS configurator configuration.
1. The printer is set as OPOS receipt printer with device name TM-T88V (default from OPOS). Did not create LDN name.
2. The drawer is set as: Cash Drawer 1, OPOS as connection Type. device name Multi_A (default name from OPOS)Did not create LDN name.
With above setup the, Click on No Sale and the drawer kicks open just fine but the printer will not work.
If I change the device name for the drawer to TM-T88V in Step 2 above, then the printer works fine but the drawer will not open.
So it is either drawer or the printer.
How do I get them both working?
thanks, everyone.
mxap
Still trying to figure out for last three weeks to get this T88V and cash drawer working on OPOS driver for micros 3700 5.4.
So far here is the progress:
The printer is on COM2.
The drawer is on back of printer connected to DK port.
POS configurator configuration.
1. The printer is set as OPOS receipt printer with device name TM-T88V (default from OPOS). Did not create LDN name.
2. The drawer is set as: Cash Drawer 1, OPOS as connection Type. device name Multi_A (default name from OPOS)Did not create LDN name.
With above setup the, Click on No Sale and the drawer kicks open just fine but the printer will not work.
If I change the device name for the drawer to TM-T88V in Step 2 above, then the printer works fine but the drawer will not open.
So it is either drawer or the printer.
How do I get them both working?
thanks, everyone.
mxap