MICB "Conference Bridging"

[Spirit1]

I have a Meridian 1 Option 81C switch. I had Conference Bridging installed. But they did not configure an DID number for conferencing. Could someone tell me where to configure the DID number?

 

[nosferatu1]

TENGO UNA MICB RLS 3 QUE AL INCERTARLA EN UN EQUIPO OPC11-C EN CUALQUIER RANURA EL SOFTWARE NO CARGA CORRECTAMENTE,YA SE CAMBIO LA TARJETA Y AUN ASI NO FUNCIONA.LES MENCIONO QUE LA TARJETA YA ESTABA FUNCIONANDO CORRECTAMENTE.

 

[Spirit1]

Sorry but I don't read or speak Spanish

 

[enrightdj]

Look at the numbers you have configured on MICB web page. Thos numbers will appear as an ACD DN and also in the MICB config on the MICB board itself (I beleive). Remember, you have two numbers associated with the primary number. They have to be sequential.

 

[Spirit1]

To clarify what I need. I want a Telephone number that would be used to connect to the MICB which would announce to put your access number in. How would I configure that?

 

[Utreg]

You administrate the Meridian Integrated Conference Bridge via a terminal?

Then it would be something like:

Status, Modify, Insert, Delete, Exit: i
start(00:00): 12: 11:55
duration(00:00): 00:45
main dn (1-6417, 2-6418, 3-6419, 4-6499, 5-7417, 6-7418, 7-7419, 8-7499): 1
conferee password length (0): 4
chairperson dn (1-6418, 2-6419, 3-6499, 4-7417, 5-7418, 6-7419, 7-7499): 4
chairperson password length (0): 5
number of ports (0(16)):4
language (U.K._English, (1-American_English, 2-French, 3-Brazilian_Portuguese, 4-L.A._Spanish)):
name entry (yes):
expansion (no):
custom greeting (brandline, (1-no, 2-meeting)): 1

Hence, you choose the dialin number(s) when configuring the conference. The numbers should be in the DID range