MGCP GATEWAY ISSUE

[Matt91]

I have an MGCP gateway configure to call an HDX (POTS phone). Configured with a route pattern so I can call the POTS phone through the HDX (PRI), I cannot call from the HDX into the CUCM (unless I delete the route pattern). Of course if I don't have the route pattern I cannot call from the VoIP phone to the HDX though. What could be the root of this issue?

 

[whykap]

I don't see how an outbound route pattern would affect an inbound call unless the inbound calls matches the route pattern somehow which would send the call back out. More details please

 

[Matt91]

I'm not using anything to call out (ex. 9 to call out). The before issue the MGCP gateway was unregistering randomly, but now it's still registered when calls are failing. I am however using a wildcard "xxx-xxxx" as the route pattern which I'm thinking is the issue though. I've changed the route pattern to "xxx-[^9]xxx" because the call manager is the only switch that uses the 9xxx block.

 

[gnrslash4life]

Have you tried creating the route pattern twice 1 for inbound, 1 for outbound, and setting each to a different partition and not allow them to talk to each other? I am not sure if this is ideal, but I would be interested to see what it does.

 

[Matt91]

As am I. Although I've never seen an inbound call routing to be honest. I'll look around though. I'll post results when I find it.