MG1010 Cabinet

[The02KID]

When programming the DSPs on a MGC card, I believe (zero)- the top portion of the card - is high density. A 96-port daughter board would be programmed as: x x 11 and x x 12 and x x 13.
The lower port - for low density - would be: x x 0.
That leaves slot 14 and 15 for Virtual DTRs.
My question is: Can you program a DSP on slot 14 (x x 14); and if you could, where would the associated hardware be?
Thanks

 

[Triton101]

128 port DSP daughter-board would go 11,12,13,14

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

 

[The02KID]

Thanks