I purchased a Mediagate mg-25 (less than a month ago, and a new laptop harddrive to go inside of it. Now I can't use it on my TV (which is basically the point of the whole thing).
When I plug it into the TV it shows some of the signs of harddrive failure, clicking, freezing, and such. Last time I tried it turned on fine and then turned itself off before I could actually do anything. However, when I plug it into my computer it works fine. No problems at all, no odd sounds, no freezing.
While I initially thought the problem was the harddrive, the difference between TV and USB points me to something that isn't being used when its on my computer. That leaves the firmware (reinstalled it twice now, doesn't help, although it does seem to work the first time I turn it on after I reinstall the stuff), some of the actual hardwire and or wiring inside, or a faulty power source.
Sound right so far? What can I do to figure it out/fix it (other than returning it, which I am about ready to do)?
thanks in advance,
TheLogo
When I plug it into the TV it shows some of the signs of harddrive failure, clicking, freezing, and such. Last time I tried it turned on fine and then turned itself off before I could actually do anything. However, when I plug it into my computer it works fine. No problems at all, no odd sounds, no freezing.
While I initially thought the problem was the harddrive, the difference between TV and USB points me to something that isn't being used when its on my computer. That leaves the firmware (reinstalled it twice now, doesn't help, although it does seem to work the first time I turn it on after I reinstall the stuff), some of the actual hardwire and or wiring inside, or a faulty power source.
Sound right so far? What can I do to figure it out/fix it (other than returning it, which I am about ready to do)?
thanks in advance,
TheLogo