I have an Option 11 running RELEASE 5 (PBX-a) and all but one of my analog phones (52 phones) have no message waiting lights. The one phone that is working is using the one ANALOG license in the system and the rest are using the CLASS licenses in the system. The actual phones are Aastra 8009 phones.
I have another Option 11 (PBX-b) running the same release and with this same CLASS license setup and the analog message waiting lights work fine there. The difference is that on the Option 11 where the lights work the phones are not using CLASS licenses but instead in the ANALOG OVERFLOW.
If I try to set CLS CNAD and CNUD on the analog phones on PBX-a I get error SCH1871 (no analog licenses available). I did not do the initial setup of these systems so I don't know how the licenses on PBX-b went to ANALOG OVERFLOW.
This all started when PBX-a went down and upon reboot all the analog phones were gone and I had to re-program them all. I have tried a new power supply and a new analog card and neither of these fixed the issue. The lights worked before the crash but not after I re-programmed all the phones.
Here is the SLT on PBX-a:
REQ slt
System type is - PBX 11C
Nortel PBX 11C
ANALOGUE TELEPHONES 1 LEFT 0 USED 1
CLASS TELEPHONES 64 LEFT 13 USED 51
DIGITAL TELEPHONES 6 LEFT 2 USED 4
DECT USERS 0 LEFT 0 USED 0
IP USERS 0 LEFT 0 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 10 LEFT 10 USED 0
PCA 0 LEFT 0 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 1 LEFT 1 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 0 LEFT 0 USED 0
RAN CON 0 LEFT 0 USED 0
MUS CON 0 LEFT 0 USED 0
SURVIVABILITY 0 LEFT 0 USED 0
TNS 2500 LEFT 2423 USED 77
ACDN 300 LEFT 298 USED 2
AML 16 LEFT 16 USED 0
IDLE_SET_DISPLAY
LTID 0 LEFT 0 USED 0
RAN RTE 500 LEFT 500 USED 0
ATTENDANT CONSOLES 2500 LEFT 2500 USED 0
BRI DSL 150 LEFT 150 USED 0
MPH DSL 0 LEFT 0 USED 0
DATA PORTS 2500 LEFT 2500 USED 0
PHANTOM PORTS 2500 LEFT 2500 USED 0
TRADITIONAL TRUNKS 2500 LEFT 2487 USED 13
DCH 80 LEFT 80 USED 0
TMDI D-CHANNELS 64 LEFT 63 USED 1
Here is a PRT of a phone with the message waiting light issue:
DES xxx
TN 006 0 00 04
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 3582 0 MARP
CPND
NAME xxx xxxxxxx
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 2999
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 2
LNRS 16
XLST
SCI 0
SCPW 1234
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6A CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUA CNAA PGND FTTC
CDMR MCDD T87D PKCH MPTD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR SSU 0000
FTR PHD
FTR FDN 2999
Here is an SLT on PBX-b:
REQ slt
System type is - PBX 11C
Nortel PBX 11C
ANALOGUE TELEPHONES 1 LEFT 0 USED 1 OVERFLOW 45
CLASS TELEPHONES 64 LEFT 18 USED 46
DIGITAL TELEPHONES 16 LEFT 5 USED 11
DECT USERS 0 LEFT 0 USED 0
IP USERS 0 LEFT 0 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 10 LEFT 10 USED 0
PCA 0 LEFT 0 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 1 LEFT 1 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 0 LEFT 0 USED 0
RAN CON 0 LEFT 0 USED 0
MUS CON 0 LEFT 0 USED 0
SURVIVABILITY 0 LEFT 0 USED 0
TNS 2500 LEFT 2417 USED 83
ACDN 300 LEFT 296 USED 4
AML 16 LEFT 16 USED 0
IDLE_SET_DISPLAY
LTID 0 LEFT 0 USED 0
RAN RTE 500 LEFT 500 USED 0
ATTENDANT CONSOLES 2500 LEFT 2500 USED 0
BRI DSL 150 LEFT 150 USED 0
MPH DSL 0 LEFT 0 USED 0
DATA PORTS 2500 LEFT 2500 USED 0
PHANTOM PORTS 2500 LEFT 2500 USED 0
TRADITIONAL TRUNKS 2500 LEFT 2483 USED 17
DCH 80 LEFT 79 USED 1
TMDI D-CHANNELS 64 LEFT 64 USED 0
Here is PRT of a TN on PBX-b that does work for message waiting lights:
DES xxx
TN 009 0 00 02
TYPE 500
CDEN 8D
CUST 0
ERL 00000
WRLS NO
DN 4151 0 MARP
CPND
NAME xxxxx xxxxxx
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 2999
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 2
LNRS 16
XLST
SCI 0
SCPW 1234
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6A CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR MCDD T87D PKCH MPTD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR PHD
FTR FDN 2999
Does anyone know how to get the phones to use the ANALOG OVERFLOW licenses instead of CLASS licenses? I think this would solve my problem, but any other insights would be appreciated as well. Thanks all!
I have another Option 11 (PBX-b) running the same release and with this same CLASS license setup and the analog message waiting lights work fine there. The difference is that on the Option 11 where the lights work the phones are not using CLASS licenses but instead in the ANALOG OVERFLOW.
If I try to set CLS CNAD and CNUD on the analog phones on PBX-a I get error SCH1871 (no analog licenses available). I did not do the initial setup of these systems so I don't know how the licenses on PBX-b went to ANALOG OVERFLOW.
This all started when PBX-a went down and upon reboot all the analog phones were gone and I had to re-program them all. I have tried a new power supply and a new analog card and neither of these fixed the issue. The lights worked before the crash but not after I re-programmed all the phones.
Here is the SLT on PBX-a:
REQ slt
System type is - PBX 11C
Nortel PBX 11C
ANALOGUE TELEPHONES 1 LEFT 0 USED 1
CLASS TELEPHONES 64 LEFT 13 USED 51
DIGITAL TELEPHONES 6 LEFT 2 USED 4
DECT USERS 0 LEFT 0 USED 0
IP USERS 0 LEFT 0 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 10 LEFT 10 USED 0
PCA 0 LEFT 0 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 1 LEFT 1 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 0 LEFT 0 USED 0
RAN CON 0 LEFT 0 USED 0
MUS CON 0 LEFT 0 USED 0
SURVIVABILITY 0 LEFT 0 USED 0
TNS 2500 LEFT 2423 USED 77
ACDN 300 LEFT 298 USED 2
AML 16 LEFT 16 USED 0
IDLE_SET_DISPLAY
LTID 0 LEFT 0 USED 0
RAN RTE 500 LEFT 500 USED 0
ATTENDANT CONSOLES 2500 LEFT 2500 USED 0
BRI DSL 150 LEFT 150 USED 0
MPH DSL 0 LEFT 0 USED 0
DATA PORTS 2500 LEFT 2500 USED 0
PHANTOM PORTS 2500 LEFT 2500 USED 0
TRADITIONAL TRUNKS 2500 LEFT 2487 USED 13
DCH 80 LEFT 80 USED 0
TMDI D-CHANNELS 64 LEFT 63 USED 1
Here is a PRT of a phone with the message waiting light issue:
DES xxx
TN 006 0 00 04
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 3582 0 MARP
CPND
NAME xxx xxxxxxx
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 2999
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 2
LNRS 16
XLST
SCI 0
SCPW 1234
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6A CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUA CNAA PGND FTTC
CDMR MCDD T87D PKCH MPTD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR SSU 0000
FTR PHD
FTR FDN 2999
Here is an SLT on PBX-b:
REQ slt
System type is - PBX 11C
Nortel PBX 11C
ANALOGUE TELEPHONES 1 LEFT 0 USED 1 OVERFLOW 45
CLASS TELEPHONES 64 LEFT 18 USED 46
DIGITAL TELEPHONES 16 LEFT 5 USED 11
DECT USERS 0 LEFT 0 USED 0
IP USERS 0 LEFT 0 USED 0
BASIC IP USERS 0 LEFT 0 USED 0
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 10 LEFT 10 USED 0
PCA 0 LEFT 0 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 1 LEFT 1 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 0 LEFT 0 USED 0
RAN CON 0 LEFT 0 USED 0
MUS CON 0 LEFT 0 USED 0
SURVIVABILITY 0 LEFT 0 USED 0
TNS 2500 LEFT 2417 USED 83
ACDN 300 LEFT 296 USED 4
AML 16 LEFT 16 USED 0
IDLE_SET_DISPLAY
LTID 0 LEFT 0 USED 0
RAN RTE 500 LEFT 500 USED 0
ATTENDANT CONSOLES 2500 LEFT 2500 USED 0
BRI DSL 150 LEFT 150 USED 0
MPH DSL 0 LEFT 0 USED 0
DATA PORTS 2500 LEFT 2500 USED 0
PHANTOM PORTS 2500 LEFT 2500 USED 0
TRADITIONAL TRUNKS 2500 LEFT 2483 USED 17
DCH 80 LEFT 79 USED 1
TMDI D-CHANNELS 64 LEFT 64 USED 0
Here is PRT of a TN on PBX-b that does work for message waiting lights:
DES xxx
TN 009 0 00 02
TYPE 500
CDEN 8D
CUST 0
ERL 00000
WRLS NO
DN 4151 0 MARP
CPND
NAME xxxxx xxxxxx
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 2999
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 2
LNRS 16
XLST
SCI 0
SCPW 1234
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6A CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR MCDD T87D PKCH MPTD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR PHD
FTR FDN 2999
Does anyone know how to get the phones to use the ANALOG OVERFLOW licenses instead of CLASS licenses? I think this would solve my problem, but any other insights would be appreciated as well. Thanks all!