I have a KX-T123211D and I'm in the process of adding voice mail to it. I can't seem to find the KXT program codes on how to turn on the message lamps on my stations.
That does not work. I've also looked in my installation manual and there is no mention of the '701' code. I have the KX-T123211D system NOT the KX-TD123211. The 'D' is in a different position - does that make a difference? Mine is the hybrid system not the digital (so I've been told).
If you are still working on this, you have to make sure you have the correct PROM chip set on your processor bord for inter-digit communications for the analog ports. Also has additional programming numbers for Voice Mail integration.
What PROM do I need?? Is there a code on it I should look for?
Thanks for the info - I haven't got the VM to work very well with it - kinda gave up on it. Maybe the PROM is the problem. BTW I do NOT show the 'B' on the side of the KXT.
Use program code 98 to determine what specific version your system is. There is a date code embeded within the string. The format is as follows:
XXXXXYYMMDDX(tm)
You are looking for a date that is April 8, 1993 or later.
Ex: L334Z930408A(tm)
To integrate the PBX to the VM, you need to change programs 80, 81, 60, 08, 09.
Use a butt-set to enable data line security on all VM ports. Code 7301#
On each phone dial 7192# to turn on follow-on ID. And set call forwarding to VM on each phone (optional).
Also, in regards to the Message Light, I leave the "Light Off Sequence" in VM programming blank because when users press the button to check messages, it extinguishes itself.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.