Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message: Device Status: GigabitEthernet 1/0/1 send failed

Status
Not open for further replies.

Tier2_Maracaibo

Technical User
Feb 21, 2007
22
US
I have 5500G EI using several Gbic SX. When access switch via Web, throws the message to me “Device Status: GigabitEthernet 1/0/1 send failed” and this way for all the fiber ports. I have looked for reference but I do not understand that it means east message. Somebody can help me with this please
 
It could be a fiber continuity issue of some sort. You should call 3COM tech support and ask them for a definition and, if they have a document that lists all the alert messages/alarms that the unit might generate.

Is the SFP/GBIC showing a link or activity?

....JIM....
 
Just need to be made to release the update on March 2 annex note of release.
2.10Web Interface
In past software releases, users were unable to change the ”Power Max” value for individual POE ports. This has been fixed.
If an SFP was inserted and there was no physical link to it, the web interface would incorrectly display the error message “SFP receive failed.” This has been fixed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top