Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message Button Gives a Re-Order tone

Status
Not open for further replies.

quazimotto

Programmer
Mar 29, 2008
755
US
Greetings Everyone,

I have a customer who has a Panasonic TDA-200 with TVA-50 VM. One of the system users was "clearing out some old voice mails and but when he was finished he could no longer get to VM form the message button. He get a re-order tone. I look at his VM box settings and all looks good. Has anyone run into this? I am at a loss at the moment.

Thank you,
Quaz
 
Log into the system and check the settings afresh

wanetelecoms@gmail.com
 
Omonat,

Log into TDA-200 or TVA-50? Where would I find the setting?

Quaz
 
Dial the VM access code manually.
Once the messages have been cleared from the VM on an extension, and the light is extinguished, the Mw button doesn't work.
Alternatively leave a new message on the extension and then use the lit MW button.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top