The new site I am working at has 6 inbound loop start trunks that keep locking up. I have been through all the programming and cannot find the source of the problem. Even the CO has these lines lock up at there site. So far the only way I have found to reset them is to disable and re-enable supervision on the trunks using LD 14. Has anyone else run into this problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Meridian loop start trunk issues.
- Thread starter wififreak
- Start date
- Thread starter
- #3
Ground start is not an option. We will be installing a PRI shortly and the provider does not have the facilities. In the mean time until I can get the PRI installed I don’t want to have to keep coming in and resetting the trunks. Does anyone know if a different type of supervision could help?
- Thread starter
- #4
- Status
Similar threads
- Question