We have a Definity G3 with expanded Meet-Me conferencing (EMMC). Our license allows 50 conferees at a time, but we seem to be able to get only seven callers on a conference at once. The eighth caller gets the "sorry, this conference is full" message and gets disconnected. I've been through the configuration screens and everything appeears to be set up correctly. Any hints? Thanks. -G.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Meet-Me Conference Full But Shouldn't Be 1
- Thread starter glenng3
- Start date
-
1
- #2
FEATURE-RELATED SYSTEM PARAMETERS
CONFERENCE/TRANSFER
Abort Transfer? n No Dial Tone Conferencing? n
Transfer Upon Hang-Up? n Select Line Appearance Conferencing? n
Abort Conference Upon Hang-Up? n Unhold? n
No Hold Conference Timeout: 60 Maximum Ports per Expanded Meet-me Conf: 100
External Ringing for Calls with Trunks? remote-only
ANALOG BUSY AUTO CALLBACK
Without Flash? n
I hate Will's there are always other relatives around
CONFERENCE/TRANSFER
Abort Transfer? n No Dial Tone Conferencing? n
Transfer Upon Hang-Up? n Select Line Appearance Conferencing? n
Abort Conference Upon Hang-Up? n Unhold? n
No Hold Conference Timeout: 60 Maximum Ports per Expanded Meet-me Conf: 100
External Ringing for Calls with Trunks? remote-only
ANALOG BUSY AUTO CALLBACK
Without Flash? n
I hate Will's there are always other relatives around
- Thread starter
- #3
Yep, our Maximum Ports per Expanded Meet-me Conf says 7. Will change it and test after hours. Thanks for the tip!
Related question: I notice on another page under FEATURE-RELATED SYSTEM PARAMETERS:
display system-parameters features Page 6 of 17
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5
Conference Parties with Public Network Trunks: 6
Conference Parties without Public Network Trunks: 6
Does this mean that only 6 offsite callers can be on a conference call at once? Or does the system do some digital magic to allow more? Thanks again. -G.
Related question: I notice on another page under FEATURE-RELATED SYSTEM PARAMETERS:
display system-parameters features Page 6 of 17
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 5
Conference Parties with Public Network Trunks: 6
Conference Parties without Public Network Trunks: 6
Does this mean that only 6 offsite callers can be on a conference call at once? Or does the system do some digital magic to allow more? Thanks again. -G.
IPOthermia
Vendor
As I recall:
MeetMeConf in CM without the 'super special expensive enhancement server' is a max of 6. No magic is available, unless you try having someone make a conference call, and then join the conference. Even then it may still see all the parties and limit itself to six.
MeetMeConf in CM without the 'super special expensive enhancement server' is a max of 6. No magic is available, unless you try having someone make a conference call, and then join the conference. Even then it may still see all the parties and limit itself to six.
- Status
Similar threads
- Locked
- Question
- Locked
- Question