Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Medpropt minor alarm?

Status
Not open for further replies.

CERL

Technical User
Nov 5, 2008
19
US
I have a G3si V11. I have 8 minor alarms for Medpropt with error codes 769 and 513. The code 513 has aux data of 19. I can't find the procedure to fix these alarms anywhere. Anyone know how I can fix this?
 
Its not taking any of the ping commands. Is the command ping medpropt?
 
ping ip-address <ip address of medpro> if you need to know this run command disp node-names ip

lever
 
Yes, I can ping the Medpro. It passed.
 
Should I try to release it?
 
it can't hurt, but check the status on the board.

"status media-processor board xxxxx"

lever
 
It's not taking that command. I did a "test board xxxx" Some parts passed and I had a few abort. Test 1505, abort error 2806 and test 1407, abort error 1. The ports with test 1407 error 1 had the minor alarms on them.
 
Try 'busy board [slot]', 'reset board [slot]', 'release board [slot]'.

Kevin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top