Media Gateway 3

[MajorACOG]

Hi, I have another problem :|

I am having a problem configure a Media Gateway, i have used default database to set my CPDC up. And when i go to create a Media Gateway and this happens

Please Help!
Thanks in Advance.

Just a Man behind a Keyboard.

 

[janaya]

ok. What loop are you using?

it is strange that it would allow you to create the MGW with loops in service. But with that said. You are trying to create the VGW channels, so go into the system and run a TNB on the MGW number. It may lead you to what is already programmed.

Also check the CEQU in LD 22
REQ: PRT
TYPE: CEQU

this will let you see what loops were configured by default. I don't think it should do this, but it's been a while since I did one from scratch.

Once you get this info, post here and we will continue.



John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

 

[MajorACOG]

I want to create it on 0 - 0
heres my print out,

Spoiler

REQ prt
TYPE cequ

CEQU
SUPL
SUPC
SUPF
DDCS MG_CARD
XCT 000 016
CONF *001 *017
MGTDS IPMG IPMG_TYPE
MGCONF IPMG PORTS IPMG_TYPE
IPCONF NODE
IPTONE NODE
MISP MG_CARD
SYNM 0
EXT0 3PE
EXT1 3PE
MCFN 279 MB

also logged in today and got this screen on EM -

http://prntscr.com/aiulgs

But i can log into via putty??

Why cant i just have one issue lol.

Just a Man behind a Keyboard.

 

[MajorACOG]

Ignore the second issue,lol, i fixed that but superloop i haven't

Just a Man behind a Keyboard.

 

[sstarkov]

XCT 000 <--- Reason of SCH5739. Loop 0 is already busy.

 

[MajorACOG]

So how could i delete that? as i never created one?

Just a Man behind a Keyboard.

 

[MajorACOG]

REMOVING SUPERLOOPS FROM DEFAULT

For anyone else struggling with this issue, i found a fix and you can do from ucm first off you go onto UCM then EM and select Core Equipment then loops and delete all loops in there. These are put in when using a default database Hope this help >

Just a Man behind a Keyboard.

 

[janaya]

ld 17

REQ: chg
TYPE: CEQU

then scroll down to XCT and X00 then you should be prompted again XCT and X016
then scroll down to CONF and X01 then you should be prompted again CONF and X017.

These don't show up in your Loops but check your CONF/TDS section. This will allow you to remove them.

Or you could just start with Loop 4 and keep moving. But those are part of the default database. Don't know why they haven't been removed.

You may need to disable them before you out them.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

 

[MajorACOG]

Hi, i have configured my 1140e and added extension on key 0 but no dial tone???

Just a Man behind a Keyboard.

 

[yyrkroon]

Because you out your conf/TDS loop

 

[MajorACOG]

Hi,
I would like to say a big thanks to you guys as i sorted it


Just a Man behind a Keyboard.