MD110 NIU not responding 1

[Tuxedopenguin]

Is there away using MDSuport or EMg tty console to reset the NIU?

 

[Isinor]

Hi,

Not unless you are logged on... RFBOI:BPOS=...;



Regards
Isinor

 

[Tuxedopenguin]

Thanks for the reply,

It does not work for the the following reason:

<RFBOI:BPOS=...;
RFBOI:BPOS...;


SURE? (YES/NO)

<YES;
NOT ACCEPTED
FORMAT ERROR
<

Is there another way or a problem with the command?

 

[parnum]

hi again tuxedo penguin

if you have no documents on command formats download this as rough guide:

http://www.satel.org/common/img/uploaded/files/support/materials/md110/LAZYDOG.HLP

do not run any command apart from ones that end in P (for print) or you may damage your md110 if you do not know what commands are for.

do IODDP; to get BPOS of NIU then do RFBOI:BPOS=x-x-x; if example IODDP says NIU position are 1-0-60-00, 1-0-60-01, and so on, then do RFBOI:BPOS=1-0-60; then Y;

Then try and log on NIU. After that it may be software on MD110 so try RFPUI:UNIT=TWP3,LIM=x; where x=lim that NIU in. Try and log on again. after this if still fails then try RFPUI:UNIT=NIP&FIP,LIM=x; where lim is which one NIU is in again. if still not work try pull out NIU for 10 second and put back in. then try again.

best parnum

 

[whosrdaddy]

parnum,

that's a really OLD version of lazydog you got there.
I can provide you the latest version if you want... (please do not distribute)

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[parnum]

thanks daddy but i have latest versions of lazydog, alex. i was just passing on the link as it is open on the internet. i am also not willing to share any e/// materials that may be copyrighted. i did not download the link i just google for lazydog and it came up so i thought it may be ok for now, just for ioddp/rfboi commands. basic things.

best parnum

 

[Tuxedopenguin]

Thank you for all the input guys,

I have managed to restart the NIU, however I get a short burst of between one and three ping replies. Having a good solid networking background I assume there is a service/setting which is conflicting causing the NIU not to work.

Does any one know what I can do to check what is causing the problem?

<RFBOI:BPOS=1-0-60;
RFBOI:BPOS=1-0-60;


SURE? (YES/NO)

<YES;

EXECUTED
<

Ping response during restart of NIU:

C:\>ping -t 172.100.1.26

Request timed out.
Request timed out.
Request timed out.
Reply from 172.100.1.26: bytes=32 time=5ms TTL=60
Reply from 172.100.1.26: bytes=32 time=5ms TTL=60
Reply from 172.100.1.26: bytes=32 time=5ms TTL=60
Request timed out.
Request timed out.

 

[whosrdaddy]

The MD110 NIU is *VERY* sensitive to broadcast network traffic. Do some network sniffing with wireshark (ethereal) on the NIU board connection. if this is the case, best solution is to isolate the NIU from the network with a router/firewall...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

I have tested by plugging the MD110 and the server into a decated isolated switch, the same problem occurs, I don't think this is a network related issue. even if I just connect the MD110 by itself to the switch I get a link status (Link LED is on) but no activity (Activity LED off)

 

[whosrdaddy]

your switch must be configured 10Mbit HALF duplex...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

Hi,

It took about so long to get our network admins to answer the call I logged but there is good news,
I have had the port configured, accordingly, but it does not work. Actually it still does the same. I have a stack of info to send through but the problem is I had to take screen shots to get it.

I think there is a problem with the configuration and possibly the licenses.
Can I email this info to someone that can assist me?

I would appreciate a the assistance.

PS: the powah of Google is lacking for the Ericsson MD110 system... is there any special way to search for things such as a copy of Alex? and maybe the latest help files with the MML commands in it.

 

[whosrdaddy]

Alex is not freeware, you need to contact your local E/// representative to purchase this package.

regarding the NIU problem, can you provide me these printouts :

IODDP;
IONPP;
CNBIP:BRDID=106,LIM=ALL;

//daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

Here are the details you asked for...

IODDP;
I/O DEVICE DATA


NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH


SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 SCSI/3 ADTX IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL2 001-0-60-2 - MML - 7
SYSN CIL 001-0-60-3 - OUT IN SERVICE
SYSN TCP 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN NET 001-0-60-4 - NETWORK/MML - 7
SYSN NET2 001-0-60-4 - NETWORK/MML - 7


END

/* SUCCEED 11:59:23 */
/* MML_TTY_COMMAND 11:59:39 [ERICSSON_DNA] Ericsson */
IONPP;
NETWORK PORT CONFIGURATION DATA


EQU IP GATE MASK ETHERNET


001-0-60-4 172.100.1.26 172.100.0.1 255.255.0.0 00.80.37.8E.44.07
END

/* SUCCEED 11:59:41 */
/* MML_TTY_COMMAND 11:59:59 [ERICSSON_DNA] Ericsson */
CNBIP:BRDID=106,LIM=ALL;


DEVICE BOARD REVISION INFORMATION


DATE: 17JAN07 TIME: 11:51:25




BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND


001-0-60 NIU ROF1375396/1 R3A
CAA 1580001 R13A EXE
CAA 1580001 R10A OLD


END
/* SUCCEED 12:00:01 */

 

[whosrdaddy]

do you have the same problem if you connect the NIU via crossed cable directly towards your PC?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

I can't answer because the cable is connected to the NIU through a fancy block type connector, and on the other end there is an RJ45 crimped to it. This goes directly into the Switch.

 

[whosrdaddy]

you can put a crossed cable via a RJ-45 extension block...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

Will try this in the morning, you didn't say if the info I sent through was good bad or lacking. Are you by any chance waiting for the results of the crossover test before you comment. Just curious because I am still unsure of the results from IODDP, why doesn't NET and NET2 report IN SERVICE?

 

[whosrdaddy]

the info you sent me is okay. NIU firmware revision is a bit low though (latest version = R19A). what revision is your PBX? (do CADAP

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Tuxedopenguin]

CADAP;
CALENDAR DATA


IDENTITY=43-0200-3
VERSION=CXP1010043/5/BC11SP14/R4C


11:34:21
WED 17 JAN 2007
END

 

[whosrdaddy]

looks okay. what are the results of the crossover test?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!