Tuxedopenguin
Technical User
Is there away using MDSuport or EMg tty console to reset the NIU?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MD110 NIU not responding 1
- Thread starter Tuxedopenguin
- Start date
- Status
- Thread starter
- #21
Tuxedopenguin
Technical User
The crossover doesn't give me a link status, well to be honest I am not sure if it is a currently cross over or not, because its a wall box to RJ45 lead, so I rewired the wallbox to the opposite of what it currently is. Which makes the lead to the switch a cross over lead. I don't know if the cable from the NIU is already crossed or not.
whosrdaddy
Vendor
crossover = switch pairs 1-2 & 3-6
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Status
