MD110 BC9 Error

[ibercom123]

Hello,

Anybody know what's means this error ? How can I solve it ?

SYSTEM: MD110 BC9 and 23 lims

TIME DATE ERROR CODE
12:00:39 23MAY14 H'1F
FAULTY ACCESS
LIMIT EXCEEDED
LOGICAL PROGRAM ERROR ADDRESS = 0200C802
LOGICAL ERROR ADDRESS = 0180FFD9
PHYSICAL ERROR ADDRESS = FFFFFFFF
ENTER
SWSW A-LEVEL SIGNAL CRADRRELEASE (H'0036)
FROM ELP6 (H'19D) EXE A IN LIM 022
TO ELP6 (H'19D) EXE A IN LIM 022
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 01 D1 00

 

[himdp]

This is an indication of a software error and is either a faulty patch or a missing patch.

Sad fact is that even a system which is performing well will have lost signals in the history log so unless you are having a problem you should ignore these.

Are you seeing problems? What is the service pack level of your system? Post a PCLOP of unit ELP6.

 

[ibercom123]

No, I'm not seeing problems. But I'm seeing this problem only in 2 of 23 lims. And I don't like errors.

<pclop:unit=elp6;
PATCH LOG DATA

UNIT: ELP6 LIM: 1
CI TYPE STATUS SIZE IA/SIGNO/ADDR CORRSTART
S62993A PROGRAM CONF 216 00002322 0000BE62
S63199A PROGRAM CONF 38 00009C4C 0000BF3A
S63199A PROGRAM CONF 38 00009CE2 0000BF60
S63199A PROGRAM CONF 48 00009D10 0000BF86
S63199A PROGRAM CONF 42 00009D48 0000BFB6
S63199A PROGRAM CONF 42 00009D84 0000BFE0
S63199A PROGRAM CONF 42 00009DBE 0000C00A
S63199A PROGRAM CONF 38 00009DE4 0000C034
S73432A PROGRAM CONF 96 0000A6AA 0000C05A
S63749A PROGRAM CONF 36 00003AC0 0000C0D6
S63749A PROGRAM CONF 36 00003B0C 0000C0FA
S63749A PROGRAM CONF 36 00003BB8 0000C11E
S63749A PROGRAM CONF 36 00003C04 0000C142
S63749A PROGRAM CONF 36 0000A1DA 0000C166
S63749A PROGRAM CONF 36 0000A222 0000C18A
S63783A PROGRAM CONF 58 00007336 0000C1AE
S63783A PROGRAM CONF 70 00003586 0000C1E8
S63783A PROGRAM CONF 54 00002BA8 0000C22E
S63783A PROGRAM CONF 54 00003446 0000C264
S64016A PROGRAM CONF 60 000056F2 0000C29A
S65136A PROGRAM CONF 62 0000BA9E 0000C2D6
S65047A PROGRAM CONF 94 0000BBA8 0000C314
S68254A PROGRAM CONF 38 00006BF2 0000C372
S69242A PROGRAM CONF 68 00001C86 0000C398
S69242A PROGRAM CONF 56 00009BA8 0000C3DC
S73370A PROGRAM CONF 70 0000754C 0000C414
S73370A PROGRAM CONF 54 00002F56 0000C45A
S73370A PROGRAM CONF 122 00002FA0 0000C490
S73370A PROGRAM CONF 44 0000222A 0000C50A
S73370A PROGRAM CONF 46 00002234 0000C536
S73370A PROGRAM CONF 124 00002252 0000C564
S73370A PROGRAM CONF 146 0000173A 0000C5E0
S73370A PROGRAM CONF 86 0000188A 0000C672
S73370A PROGRAM CONF 62 000013E6 0000C6C8
S73370A PROGRAM CONF 62 00001678 0000C706
S73432A PROGRAM CONF 56 00006E16 0000C744
S73577A PROGRAM CONF 40 00002848 0000C77C
S73577A PROGRAM CONF 56 0000BBFC 0000C7A4
S73577A PROGRAM CONF 56 00006C2E 0000C7DC
S79023A PROGRAM CONF 52 00006988 0000C814
S79023A PROGRAM CONF 52 000069F8 0000C848
S79023A PROGRAM CONF 58 000032F0 0000C87C
S79023A PROGRAM CONF 124 000032F6 0000C8B6
S79023A PROGRAM CONF 112 000032FC 0000C932
S78745A PROGRAM CONF 84 00006C96 0000C9A2
S78745A PROGRAM CONF 86 0000BC86 0000C9F6
S78745A PROGRAM CONF 76 0000B47A 0000CA4C
S78745A PROGRAM CONF 54 0000B526 0000CA98
S78745A PROGRAM CONF 154 0000410C 0000CACE
S78745A PROGRAM CONF 72 00000EBA 0000CB68
S78745A PROGRAM CONF 162 00000D7A 0000CBB0
S78745A PROGRAM CONF 132 0000327E 0000CC52
S78745A PROGRAM CONF 134 00002A46 0000CCD6
S78745A PROGRAM CONF 108 0000A600 0000CD5C
S75511A PROGRAM CONF 64 00004120 0000CED6
S75315A PROGRAM CONF 36 000069D8 0000CF16
S70900A PROGRAM CONF 38 00004D7A 0000CF3A
S70900A PROGRAM CONF 52 00004DA2 0000CF60
S70929A PROGRAM CONF 56 00001796 0000CF94
S72552A PROGRAM CONF 100 00002548 0000CFCC
S79023A SIGNAL CONF 386 000000EB 0000D030
END

 

[himdp]

Hi,
as I mentioned, even the best systems will have lost signals. This particular one is coming from the patch S73577A. This is an old patch and was replaced by S84905A. See

http://tek-tips.com/viewthread.cfm?qid=831407

 

[himdp]

As this seems to be a BC9 system which has not been upgraded for over 10 years, you should get used to accepting errors in the software. A good strategy is to use lost signals as a clue to the cause of actual problems not to try and track down lost signals just because they are there.

 

[ibercom123]

Thank you, himdp.

You're right, it is a old BC9 system.

I'm trying to remove some lims and I don't want see error . I guess they are older.

Now I only need remove (unconfigure) a alu1 or alu2 board. And maybe move some common units program.