Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MCR on 500 set
- Thread starter jgaffney
- Start date
- Thread starter
- #4
phonejack99
Technical User
Still NO
From the NTP --
A Multiple Appearance, Multiple Call Arrangement is available between Meridian 1 proprietary telephones only. It allows as many calls to be in progress as there are appearances of the DN. Selection of the ring option
allows the DN to be rung whenever an incoming call is directed to the idle DN.
From the NTP --
A Multiple Appearance, Multiple Call Arrangement is available between Meridian 1 proprietary telephones only. It allows as many calls to be in progress as there are appearances of the DN. Selection of the ring option
allows the DN to be rung whenever an incoming call is directed to the idle DN.
- Thread starter
- #6
phonejack99
Technical User
NTP = Nortel Tecnical Publication or more informally as Not This Page
- Thread starter
- #8
phonejack99
Technical User
J,
Yep. Comes with the switch so you have a set or the cd.
Yep. Comes with the switch so you have a set or the cd.
- Thread starter
- #11
Here is the deal -
Help desk number is 4411. It is an MCR ( MCN ) on about 10 3903s and 3904s.
We want a cordless for walking around and we want to be able to have 4411 ring on it. We have a two line cordless, line one is x3939. We want 4411 on the second cordless line.
4411, if not answered goes to a voice mail box which is routed by TOD to other m-boxes, in case this makes any difference.
Ideas to make this work would be greatly appreciated.
THX!
Help desk number is 4411. It is an MCR ( MCN ) on about 10 3903s and 3904s.
We want a cordless for walking around and we want to be able to have 4411 ring on it. We have a two line cordless, line one is x3939. We want 4411 on the second cordless line.
4411, if not answered goes to a voice mail box which is routed by TOD to other m-boxes, in case this makes any difference.
Ideas to make this work would be greatly appreciated.
THX!
phonejack99
Technical User
Could you make 4411 key 0 and simply call forward to cordless ext.?
you can use a data tn to route with and set up as follows:
set cordless line 2 to a new dn with hunt and fdn to mail
and hta fna in cls
and program a port no phone as
example:
tn 4 0 0 16 or ports 16 thru 31
type - any digital type
hunt to cordless line2
fdn to cordless
cls flxa vce cptd wtd hta fna sfa
key 0 mcr 4411
marp=yes
this port won't disable and needs no phone and calls should go to the cordless before going to mmail
set cordless line 2 to a new dn with hunt and fdn to mail
and hta fna in cls
and program a port no phone as
example:
tn 4 0 0 16 or ports 16 thru 31
type - any digital type
hunt to cordless line2
fdn to cordless
cls flxa vce cptd wtd hta fna sfa
key 0 mcr 4411
marp=yes
this port won't disable and needs no phone and calls should go to the cordless before going to mmail
kristiandg
Programmer
MCR is available on 500 sets also, CLS=MCRA. However, the privacy issue is moot. MCR's clear on other phones when answered. Thats the advantage of them. What you want sounds like you want SCRs.
Hope this helps...
Kris
Hope this helps...
Kris
i have several depts with mcrs on digital and analog sets. my exten 3000 is used as a code blue alert and it appears on 12 2616's and 4 2500's. and as stated, mcrs are by default private conversations. when i answer my phone, your mcr light stops flashing, if another call comes in, it rings all idle stations
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question