Does anyone know if any ports need to be opened up to manage the callflows on a UCM over a WAN? I know that port 7070 needs to be open to manage the actual server, but wasn't sure if anything needed to be done to use VMPro client. I have a customer with multiple sites (UCM at each site) and I'm trying to set up a single remote access server to manage all sites, but when I try to log in via the VMPro client using Administrator/Administrator and the IP address of the UCM, I get "Failed to create remoting interface".
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Managing UCM callflows over WAN
- Thread starter BDaglian
- Start date
the 7070 is only for the actual server admin, the vm pro uses a different port
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.
Joe W.
FHandw, ACSS (SME), ACIS (SME)
Give a tech a solution and he will be back tomorrow to ask you the next question, teach a tech how to read the manual and he will be able to solve the problems for a life time.
- Thread starter
- #3
- Status
Similar threads
