Malfunctioning IP406 Office

[Russell101]

Hi all,

I have the above base unit and I can't seem to do anything with it. What's happening is all the LEDs (including a red main LED) light up for about 3 seconds, then the main light turns orange and all the others go off for about 1 second, then it just repeats. I've tried DTE-ing to see if I can default the unit through HyperTerminal but it is not allowing me to enter any commands. The last thing I did was try to upgrade the unit to version 6 and it started the sequence after the unit timed out without upgrading. Any ideas on what's wrong and how to fix it? Many thanks in advance.

 

[tlpeter]

It should do normally.
Also an offline upgrade should work but I could be wrong.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Russell101]

Hi guys,

Thanks very much for all your help and tips, I've managed to sort it out now and it works fine

 

[TomMills]

how did you fix it?

http://www.twitter.com/tem1985

ACSS-SME
fo shizzle ma nizzle.