Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Main VFP Window
- Thread starter sheronne
- Start date
craigsboyd
IS-IT--Management
sheronne,
The FAQ that rgbean pointed you too is good, however I wish that ramani, the FAQ's author, would add information regarding the use of "SCREEN=OFF" in the CONFIG.FPW. Without it there is always a flicker of the _screen object when the application first starts up.
Was your question about just the _screen object being invisible, or were you also asking about the tray icon? Just curious.
Slighthaze = NULL
[sub]craig1442@mchsi.com[/sub][sup]
The FAQ that rgbean pointed you too is good, however I wish that ramani, the FAQ's author, would add information regarding the use of "SCREEN=OFF" in the CONFIG.FPW. Without it there is always a flicker of the _screen object when the application first starts up.
Was your question about just the _screen object being invisible, or were you also asking about the tray icon? Just curious.
Slighthaze = NULL
[sub]craig1442@mchsi.com[/sub][sup]
"Whom computers would destroy, they must first drive mad." - Anon
[/sup]
Mike Gagnon
Programmer
Dicklylam
This solution has been around since version 3, when used propely it works. Can you explain what you mean? Can you propose a better solution?
Mike Gagnon
If you want to get the best response to a question, please check out FAQ184-2483 first.
This solution has been around since version 3, when used propely it works. Can you explain what you mean? Can you propose a better solution?
Mike Gagnon
If you want to get the best response to a question, please check out FAQ184-2483 first.
dickylam
IS-IT--Management
- Jun 24, 2001
- 86
I applied this for a form used to show the button for user selection. I run this form through the prg file where prg is set to main, from the form which applied the knowledge of hiding vfp screen, it will still on the top, never disappear even giving thisform.release, and the main problem is, when this form is called, it never in setfocus, that is never activate automatically and require a click on the form everytime.
craigsboyd
IS-IT--Management
Yes the config.fpw is necessary, but you can add it to your project and compile it in the exe. No extra file, no extra fuss.
- Status
Similar threads
- Locked
- Question
