Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mailbox says "No messages to review" 1

Status
Not open for further replies.

cpm23

Technical User
Mar 18, 2005
142
0
0
US
I have a user that when logging into his mailbox gets "You have no messages to review. Press 1 to disconnect, press 2 to send a message." If I press any other key it says "you have pressed an incorrect key.I ran a report on his mailbox and there are 7 new messages in it. I tried changing the COS to the same one I have but it makes no difference. Any ideas?
 
Forgot to mention that it is an Aria 250.
 
They are logging into the mailbox with a home or guest password and not their password.

Reset the password for them and it will work fine. Sound like they tried to change their password and changed the wrong one.



Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Ken,you're correct. I ended up changing his password after looking over the user guide and it worked. Thanks for the response.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top