littlepillow
Programmer
hi folks!
i've got a lucent cellpipe 20 S (E) DSL Modem / Router Hybrid and want to change the bandwidth limits.
to be honest, i'm not that familiar with this subject but nevertheless i've already got "Hyperterminal 6.x private edition" installed and plugged a convenient cable to establish a connection.
right now i mess arround with the settings of hyperterminal because i dont know which ones are supposed to be used.
i chose these ones:
9600=baud, data bits=8, parity=none, stop bits=1, flow control=none, VT100 emulation, xmodem protocol and everything else is all default
Although i'm not able to receive any data, what did i do wrong? may anybody be so kind and give me some hints?
greetings
igor
i've got a lucent cellpipe 20 S (E) DSL Modem / Router Hybrid and want to change the bandwidth limits.
to be honest, i'm not that familiar with this subject but nevertheless i've already got "Hyperterminal 6.x private edition" installed and plugged a convenient cable to establish a connection.
right now i mess arround with the settings of hyperterminal because i dont know which ones are supposed to be used.
i chose these ones:
9600=baud, data bits=8, parity=none, stop bits=1, flow control=none, VT100 emulation, xmodem protocol and everything else is all default
Although i'm not able to receive any data, what did i do wrong? may anybody be so kind and give me some hints?
greetings
igor