LSP's and Main Site

[btrain08]

I need some help. I have a main site running CM5/8730's in HK and an LSP in Beijing (s8300) and I have no clue about the following:

IP softphone -- do I log in via the main site IP address or the lsp

I'm having the most difficult time trying to figure out the ARS table. They are setup with Partion route patterns. Do the ars entries apply to both switches.. ex..

string - 001 min - 3 max- 22 p2
string - 3 min - 1 max - 8 p1

 

[testLED]

Hi IP address for the Ip-softphone should be located at the main site.

Also regarding ARS tabes. That all depends if location based ARS has been set up? You will nned to check what location LSP is "disp locations" and then for example if it is location 2 you will need to run "list ars ana loc 2" If table is empty then you are only using the main ARS table.

 

[inerguard]

Use the ip address of a clan card based at your main site.




[Started on Version 3 software 15 years a go]