Lost admin password

[tdmulor]

I is there someway that I can retreive or reset the admin password to a IPECS system?

Regard
UO

 

[doktor]

You will need to reset the database to default.
Then you loose your database!!! with all data for stations og CO lines etc. Then in PGM 162 you need to set your new password.

///doktor

 

[morenot]

I don´t have made this..
Maybe, if you have a Backup of your configuration, try changed it with PCADMIN OFF LINE, then restore your backup,
obviusly you lost the recents changes.

Saludos...

JLMT//

 

[morenot]

Try 147* like admin password

 

[officerdibble]

I found that after entering the LDK Remote diagnostic tool and entering the remote command password "brandy" that I could then access the system through connect in pcadmin. The password defaulted to "0000"

This could have been just a fluke, but it's the way it was.

 

[doktor]

Strange. Are you using an ipLDK tool (i.e. ipLDK Remote Diagnostic) for the iPECS?

///doktor

 

[officerdibble]

LDK PCADMIN" as downloaded from the site your refered to in a previous post lg-nortel.es