Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lost admin password

Status
Not open for further replies.

tdmulor

Technical User
Sep 3, 2007
78
SE
I is there someway that I can retreive or reset the admin password to a IPECS system?

Regard
UO
 
You will need to reset the database to default.
Then you loose your database!!! with all data for stations og CO lines etc. Then in PGM 162 you need to set your new password.

///doktor
 
I don´t have made this..
Maybe, if you have a Backup of your configuration, try changed it with PCADMIN OFF LINE, then restore your backup,
obviusly you lost the recents changes.

Saludos...

JLMT//
 
I found that after entering the LDK Remote diagnostic tool and entering the remote command password "brandy" that I could then access the system through connect in pcadmin. The password defaulted to "0000"

This could have been just a fluke, but it's the way it was.
 
Strange. Are you using an ipLDK tool (i.e. ipLDK Remote Diagnostic) for the iPECS?

///doktor
 
LDK PCADMIN" as downloaded from the site your refered to in a previous post lg-nortel.es
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top