We have a few computers running Win98 and Win2K. The problem that we are having is that we have local and network printers hooked up, and when some of our users try to print they will get a message saying that a printer needs to be set up before they can print. The printers have been set up but every now and then you go look in the printer control box and there will be no printers showing. But if you shutdown the system and bring it back up and look in the printer control box you will see the printer but after printing a few documents the printer will diappear again. Has anyone else seen this and how did you fix it???
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
losing printers
- Thread starter gregkot
- Start date
tlcscousin
Technical User
Is this only happening on the w2K machines? If so sounds like spooler service stops.
Check event viewer, and reinstall updated drivers.
Check event viewer, and reinstall updated drivers.
- Thread starter
- #3
No this is not only happening on Win2k. The first time it happened it was on a Win98 machine. That went on for a while when we finally replaced the printer cable it went away for a while but now it seems to be coming back. I tried a new cable on the Win2K machine but that did not help it at all.
williamstilts
IS-IT--Management
is the network printer set up on win 98 or win 2k
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question