The documentation explains this:
Step 1 Open a command window and type the following command:
bmp2logo imageID image.bmp image.logo
where:
•imageID is a unique identifier for the new figure. This identifier must be a number from 0 through 4294967295 and must be different than the identifier of the figure that is currently on the phone.
•image is the base file name of the image that you previously created and saved with the graphics program.
For example, if the image identifier is 10 and the base name of your image file is mylogo, type this command:
bmp2logo 10 mylogo.bmp mylogo.logo
Step 2 Copy the image.logo file to the root directory on the TFTP server
Step 3.- Edit the profile.
BUT HOW CAN I EDIT THE PHONE´S PROFILE? I CAN´T SEE A FILE GKXXXXXXXX.CFG. SO I CAN EDIT ANYTHING.
I have read in the documentation that I must edit the gkxxxxxxxxx.cfg file for editing the phone profile, but I can´t see this file. I don´t know if exist another method for editing the phone profile. Really I would like to include a logo in my phone but I don´t know what must I do.
tftp-server flash:gkdefault.cfg alias Spain/gkdefault.cfg
tftp-server flash:acotel.logo
and it works, if you are using something different from CCME I suposse you need to make some changes." I use cisco call manager 3.3 but i don´t know if it is express or it isn´t
Really I don´t know what must I do.. must I type this?
tftp-server flash:gkdefault.cfg alias Spain/gkdefault.cfg
tftp-server flash:acotel.logo, but, where? and how can I do it?
this directory is c:/program files/cisco/tftppath
but now I have 2 questions:
1.- When I make the image.logo, this file contains 0 bytes.
2.- When I try to compile gkdefault ( I am doing the following in the directory where the file is is the cfgfmt tool and I type: cfgfmt gkdefault.txt gkdefault.cfg it appears an error "error: unknow or encrypted file: `gkdefault.txt´". And it appears a file gkdefult.cfg with 0 bytes.
I have compiled the image.logo again and now contains 10KB. I have also compiled the gkdefault.cfg too and now contains 40KB.
I have put these files on c:/program files/cisco/tftppath, but has no effect when I restart the 7912g phones
Have I forgotten something?
I manage to pass the error by adding these 2 lines to the gkdefault.txt file :
#txt
UIPassword:0
upgradelogo:10,0,mylogo.logo
but I still get nothing on the Phone !
[ul]
[li] I used the TFTP IP Address - which is the CCM IP[/li]
[li] I used (0) instead of the IP as mentioned on some Cisco Sites.[/li]
[/ul]
still nothing changed on the Phones !
Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]
CCNP,CCSP,CCA,MCSE,MCSA
Try to compile the file directly from c:/
I had the same error, but when I moved the files to c:/ and compiled the files in c:/ so it worked.
The documentation explains that you must use c:/.
Now I have the files compiled and these are on the directory c:/program files/cisco/tftppath but the phones don´t show the logo... I don´t know why is it...
Any idea?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.