Local calling stopped working

[scanjet]

It's an option 11c with analog trunks. recently the local seven digit calling stopped working. I can dial seven digits directly from the blocks. I'm not sure where to look. I have the area code of 831 local area code using rli 3

 

[scanjet]

Here is the rli and npa



NPA 1831
RLI 3
***
DENY 976

SDRR DENY CODES = 1
ITEI NONE









REQ prt
CUST 0
FEAT rlb
RLI 3

RLI 3
ENTR 1
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 3
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 1
NALT 5
MFRL 7
OVLL 0

 

[KCFLHRC]

Soooo, if you are wanting to dial 7 digits like for an NXX and Subscriber, why in the world are you looking at an NPA

 

[scanjet]

I'm not sure where to look. I was just trying to give any information I can.

 

[KCFLHRC]

Local calling should be built as an NXX, not an NPA so in this example, 214-844-1212, 844 is the NXX. So if you have the ability to call a 7 digit # you would dial 9 + 844-1212. The system would look at the NXX programming of 844

 

[scanjet]

Thank you for the help. Here is what I have

NXX 831
RLI 2
SDRR NONE
ITEI NONE

DMI This is all thats built

REQ prt
CUST 0
FEAT dgt
DMI


DMI 9
DEL 0
INST 9
CTYP NCHG



REQ prt
CUST 0
FEAT rlb
RLI 2

RLI 2
ENTR 1
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO

ISET 1
NALT 5
MFRL 7
OVLL 0


MEM AVAIL: (U/P): 2788336 USED U P: 291270 66121 TOT: 3145727
SCH5066

REQ

 

[KCFLHRC]

Wonder why it is built as Entry 1 and not Entry 0 in the RLI

 

[KCFLHRC]

Someone has changed something. I would remove Entry 1 and make it Entry 0 with all the same values