Linking 2 System NEC SV9100 With ISDN Card GCD PRI

[Liza R]

Dear All,

I have problem with program to linking 2 system PABX SV9100
I have tried to program but it didn't work, I got the tone for ISDN but after dial extension from system A to system B the result is no response

please help me
thanks

 

[CoralTech]

What's the application? Netlink ia a lot cleaner. Anyhow, you are going to have to use Froute tables and I would HIGHLY suggest making the trunk type Tie Line.

 

[OzzieGeorge]

I don't think you can link two systems via ISDN as neither can simulate the exchange side. Or are you using something in-between?

 

[miteshrathod85]

yes You can conncect link with pri card. sv9100 system a pri card in network mode and system b pri card in network mode and
SYSTEM A MASTER AND SYSTEM B SLAVE MODE THAN ASPIRE NET programming you can do it

 

[OzzieGeorge]

Just curious, where in programming do you set master or slave mode?

 

[CoralTech]

10-03 I think.

 

[OzzieGeorge]

Yep, I missed that one! Will remember that for the future.

 

[miteshrathod85]

I attach a screen short of sv9100 pri programming

 

[Liza R]

SOLVED thanks all,