Version 5
I just checked the replacing faulty hardware procedure in the library, i will try to apply it, but i don't have a safety backup. I am thinking about reinitialize main lim?
Now to your problem. Please do not do anything to LIM 1 (server 1).
When you install a system, as part of the process a config_mirror is made.
This stores relevant information about all other LIMs in the system on LIM 1 and is used in the repair_lim process.
If you mess up LIM 1 you will put the system in a situation which is not recoverable.
Follow the published procedure and you should be OK. Take note of the system admin section of the manual regarding system backup routines.
It is important to have a recent data_backup, config_mirror and safety backup all of which can be automatically scheduled with Linux crontab. It is also wise to have config_mirror back up on at least one other server (see the config_mirror command export switch for information) in case you ever need to repair LIM 1.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.