LDN to point to a different DN

[rongill]

Hello we currently have a main number of xxx-xxx-5000 with 5000 being the LDN. Internally this number is pointing to our Reception console which is 3000.

I can't find where to change this 3000 to another number? Thanks in advance

 

[GHTROUT]

Remove 3000 from the LDN entry, and rebuild it as a Phantom, DCFW'd to wherever you desire.

Find LDNs in:

LD 21
REQ PRT
TYPE LDN

Change in LD 15. Make sure you have "some" 4 digit number in the LDN0 spot. You need a number there - any number.



--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[rongill]

I don't see 3000 in any ldn directory. Even when I type in ld 21
prt
type ldn .. i get an error

When i do
ld 21
prt
type dnb 5000
i get dn 5000 type LDN.

How can I print ld 15 data to see what is currently there and where i need to change it?

 

[rongill]

u can ignore the above message: here is what i get when i print in ld 21. I don't want to change the 5000 but i can't seem to find any reference in the system where 5000 points to our reception console of 3000.

Can I just build a phantom TN of 5000 and forward it to any other number?

TYPE LDN_DATA
CUST 00
OPT XLDN
DLDN NO
LDN0 5000
LDN1 0
LDN2
LDN3
LDN4
LDN5
ICI 00 LD0
ICI 01 LD1
ICI 02 DL0
ICI 03 RLL
ICI 04 MWC
ICI 05 CFB
ICI 06 INT
ICI 07
ICI 08
ICI 09

 

[rongill]

Here is the printout of the receptionist phone (3000)

TN 000 0 05 00 VIRTUAL
TYPE 2250
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
SGRP 0
SETN 000 0 05 01
ANUM 01
IADN
ALPD NO
SSU 0000
ICDR ICDD
ABAN ABDD
CPND CNDA
EBLF BLFA
AADN
DNDI DNDA
DAPC DAPA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 ADL
KEY 03 ADL 5734
KEY 04 PRK
KEY 05 EES
KEY 06 SSC 0000
KEY 07 DPD
KEY 08 DPS
KEY 09 DCW
KEY 10 ADL 9*8789912
KEY 11 ADL 9*8789913
KEY 12 ADL 703
KEY 13 ADL 271
KEY 14 ADL 9*8789963
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 15 SEP 1995

 

[GHTROUT]

If you print a DNB on 3000 and get nothing, then nothing is 3000

I was getting 5000 and 3000 mixed up.

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[rongill]

i get the below when i print a dnb on 3000

DN 3000
TYPE ATT
TN 000 0 05 00 15 SEP 1995
(2250)

and this is when i print the above TN

TN 000 0 05 00 VIRTUAL
TYPE 2250
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
SGRP 0
SETN 000 0 05 01
ANUM 01
IADN
ALPD NO
SSU 0000
ICDR ICDD
ABAN ABDD
CPND CNDA
EBLF BLFA
AADN
DNDI DNDA
DAPC DAPA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 ADL
KEY 03 ADL 5734
KEY 04 PRK
KEY 05 EES
KEY 06 SSC 0000
KEY 07 DPD
KEY 08 DPS
KEY 09 DCW
KEY 10 ADL 9*8789912
KEY 11 ADL 9*8789913
KEY 12 ADL 703
KEY 13 ADL 271
KEY 14 ADL 9*8789963
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 15 SEP 1995

 

[GHTROUT]

OK, it's not an LDN, it's the Attendant DN - Sorry for not thinking that.

LD 21
REQ PRT
TYPE ATT

You'll see 3000 in there

Change in LD 15

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[DFKSydney]

If you cannot see 5000 as either an LDN or a DNB, try LD 49.... PRT IDC.

It sounds like there is a conversion happening.

 

[GHTROUT]

Note his LD22

DN 3000
TYPE ATT
TN 000 0 05 00 15 SEP 1995
(2250)

So it is the Attendant DN

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[rongill]

nothing listed in print idc

this is what comes up when i print dnb 5000

DN 5000
TYPE LDN

 

[GHTROUT]

5000 is an LDN and 3000 is the ATDN. It's all old news now

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[rongill]

so I tried changing the ATDN to an existing DN and getting
SCH0730

our DN is a 1120 IP phone not an attendant analouge console if that makes a difference

 

[rongill]

i can change the ATDN to a non-existant dn . but when i call the main number xxx-xxx-5000 it still reaches the attendant console.

Do I need to change the LDN to a specific DN?

 

[rongill]

Below is a printout of everything that is relevant

REQ: prt

TYPE: dn

TYPE DNB
CUST 0

DN 5000

DATE

PAGE

DES


DN 5000
TYPE LDN


**********************************

>ld 21

PT1000

REQ: prt

TYPE: ldn

TYPE LDN_DATA
CUST 0


TYPE LDN_DATA
CUST 00
OPT XLDN
DLDN NO
LDN0 5000
LDN1 0
LDN2
LDN3
LDN4
LDN5
ICI 00 LD0
ICI 01 LD1
ICI 02 DL0
ICI 03 RLL
ICI 04 MWC
ICI 05 CFB
ICI 06 INT
ICI 07
ICI 08
ICI 09


**********************************

ATT_DATA

REQ: prt

TYPE: att

TYPE ATT_DATA
CUST 0


TYPE ATT_DATA
CUST 00
OPT AHD BIND BIXA BLA
DNX IC1 ITG IDP XLF IBL
FKA MWUD LOD
REA SYA ATDA
ATDN 3000
NCOS 4
CWUP NO
CWCL 2 5
CWTM 10 40
CWBZ YES YES
EFLL 0
MATT YES
RTIM 30 60 30
ATIM 0
AQTT 30
AODN
SPVC 00
SBLF NO
RTSA RSAD
SACP NO
ABDN NO
IRFR NO
XRFR NO
IDBZ NO
PBUZ 02 10
ICI 00 LD0
ICI 01 LD1
ICI 02 DL0
ICI 03 RLL
ICI 04 MWC
ICI 05 CFB
ICI 06 INT
ICI 07
ICI 08
ICI 09
RICI 0 1

REQ:

*****************************

REQ: prt

TYPE:

CUST 0

DN 3000

DATE

PAGE

DES


DN 3000
TYPE ATT
TN 000 0 05 00 15 SEP 1995
(2250)


NACT

*****************************

ld 20


PT0000
REQ: prt

TYPE: 2250

TN 0 0 5 0

DATE

PAGE


TN 000 0 05 00 VIRTUAL
TYPE 2250
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
SGRP 0
SETN 000 0 05 01
ANUM 01
IADN
ALPD NO
SSU 0000
ICDR ICDD
ABAN ABDD
CPND CNDA
EBLF BLFA
AADN
DNDI DNDA
DAPC DAPA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 ADL
KEY 03 ADL 5734
KEY 04 PRK
KEY 05 EES
KEY 06 SSC 0000
KEY 07 DPD
KEY 08 DPS
KEY 09 DCW
KEY 10 ADL 9*8789912
KEY 11 ADL 9*8789913
KEY 12 ADL 703
KEY 13 ADL 271
KEY 14 ADL 9*8789963
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 15 SEP 1995


NACT

REQ:


******************************

 

[GHTROUT]

If you want 5000 to reach the new phone, change the LDN0 to any other four digit unused number, then create a phantom TN with 5000 DCFW'd to the DN of the new phone. Basically what you posted on May 28th.

If you want 3000 to reach the new phone, change the ATDN to any other four digit unused number, then create a phantom TN with 3000 DCFW'd to the DN of the new phone.

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--