Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
LD Trunk Groups 2
- Thread starter usx
- Start date
-
1
- #2
bigindian65
Technical User
You can make it your default CLID table 0 entry, but you need to contact the carrier as well, I believe, to send out proper ani data.
- Thread starter
- #3
bigindian65
Technical User
sorry, LD 15
chg
net_data
CLID (enter yes when you get to it)
before you do ld 15, prt your current CLID in LD 21
prt
CLID
chg
net_data
CLID (enter yes when you get to it)
before you do ld 15, prt your current CLID in LD 21
prt
CLID
-
1
- #5
ld 21
prt
clid
will show you the as built, make clid 0 your main number, then contact your provider to read it... if the only number you want displayed is the main, the provider can handle that.
john poole
bellsouth business
columbia,sc
prt
clid
will show you the as built, make clid 0 your main number, then contact your provider to read it... if the only number you want displayed is the main, the provider can handle that.
john poole
bellsouth business
columbia,sc
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
