Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LD Trunk Groups 2

Status
Not open for further replies.

usx

MIS
Jun 7, 2006
32
US
How can I program in our switch to out pulse our main number? We have a CS1000M multi group Nortel PBX that is on release 4.5

Thx
 
You can make it your default CLID table 0 entry, but you need to contact the carrier as well, I believe, to send out proper ani data.
 
pardon my ignorance....what overlay?


thx
 
sorry, LD 15
chg
net_data

CLID (enter yes when you get to it)

before you do ld 15, prt your current CLID in LD 21

prt
CLID
 
ld 21
prt
clid

will show you the as built, make clid 0 your main number, then contact your provider to read it... if the only number you want displayed is the main, the provider can handle that.

john poole
bellsouth business
columbia,sc
 
Thx bigindian and johnpoole.....its fixed now.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top