huggemmoff
Technical User
I have an IP406V2 running at 4.2(4) and have just added a 400 DS V2 running at 7.0. Can I use V5 office to get them both up to date or should I downgrade the 400?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Latest Office version that can be used on IP406 V2 1
- Thread starter huggemmoff
- Start date
- Status
- Thread starter
- #3
huggemmoff
Technical User
The reason for the upgrade is that the 5410 & 5420 phones do not show the extn no when connected to the module whereas they do on the 406! I assumed that was because the versions differed.
-
1
- #4
It is indeed.
The module is on release 5. something while the 406 is on 4.2.4
You have two option.
Downgrade the module to 3.2.999 and then to 4.2.4 or upgrade the 406 to 5.026 and the module to 3.2.999 and then to 5.0.26
BAZINGA!
I'm not insane, my mother had me tested!
The module is on release 5. something while the 406 is on 4.2.4
You have two option.
Downgrade the module to 3.2.999 and then to 4.2.4 or upgrade the 406 to 5.026 and the module to 3.2.999 and then to 5.0.26
BAZINGA!
I'm not insane, my mother had me tested!
- Status
Similar threads
- Locked
- Question
- Locked
- Question