Kx td 1232 Blast from the past

[jonjoeni]

I need to make some minor changes on a new customers old system if you follow me.When i press "Program * #" I do not get as far as entering the password as the process is terminated at the #. I have double checked that this is X201 etc. Funny thing is the phone is a KX-T7730 so there must be no XDP on port 1 & this is not the recommended phone for programming.Any ideas. Why for my head hurt !!!!!
Thanks
Jon

 

[cwc3]

Why not connect with software ? It should work on jack 01 ?try
pause *# xxxx instead or get a 70/72/7430

 

[BTBZ]

You need to be on ext 101 or the admin ext if changed

 

[cwc3]

theres that echo

 

[jonjoeni]

Thanks guys but at the end of the day I am going to have to go to site with a proper digital phone & my rusty laptop. As always it is a 2 day camel ride away but what the heck when your marching you're not fighting. Ta Ta

 

[chriskane001]

You will need a KXT-7433 handset as a minium for you to get into programming via the handset on jack 01

 

[cwc3]

actually any kx display phone will do . i use kx-t 123230 for quick changes.