Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Kx td 1232 Blast from the past

Status
Not open for further replies.

jonjoeni

Technical User
Oct 21, 2008
68
GB
I need to make some minor changes on a new customers old system if you follow me.When i press "Program * #" I do not get as far as entering the password as the process is terminated at the #. I have double checked that this is X201 etc. Funny thing is the phone is a KX-T7730 so there must be no XDP on port 1 & this is not the recommended phone for programming.Any ideas. Why for my head hurt !!!!!
Thanks
Jon
 
Why not connect with software ? It should work on jack 01 ?try
pause *# xxxx instead or get a 70/72/7430
 
You need to be on ext 101 or the admin ext if changed
 
Thanks guys but at the end of the day I am going to have to go to site with a proper digital phone & my rusty laptop. As always it is a 2 day camel ride away but what the heck when your marching you're not fighting. Ta Ta
 
You will need a KXT-7433 handset as a minium for you to get into programming via the handset on jack 01
 
actually any kx display phone will do . i use kx-t 123230 for quick changes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top