Dear Members,
I was trying to register kx-nt511 on tde600, if I enable the VLAN it does not register neither does it connect.
if I disable the vlan everything works well. What could be the problem?
We have on this system(TDE600)224 nos of kx-NT321 which is not having this same issue when VLAN is enabled.
once the VLAN is enabled on the KX-NT511 the display will indicate connecting and it hangs there and reboots once a while.
Are the ports that you have the new phones on set to accept tags that the system is on.
if the ports are set as native vlan(pvid) then if you turn on tagging on the phone the switch will not read the header and route accordingly. the port will have to be set to accept tags or else leave vlan off and set the switch port to native vlan of the system
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.