KEM Key Expansion Modules on 1200 Series 2

[mdpuk]

Hi, we have bought some key expanders for some 1200 series phones. There is no guide with them and when they are installed they appear to boot up fine. However I can't get autodials etc set on them, does anyone know what key numbers they use? We are using the 12 key LCD model.

 

[MagnaRGP]

Have you added the KEM in programming on the TN? It won't recognize it otherwise.

 

[mdpuk]

What overlay do you add a KEM? In LD11?

A KEM4 is shown in TM but this isn't configurable.

 

[bignose21]

against the set you have a prompt AOM (add on Module) set to 1 (if you have 1 kem on the set) and there is a class of serice of KEMn (n=number specific to the set type(if you got the right number of keys in software then you have the right cls))

 

[amlancaster]

I've attached a 1200 series expander to a 1140 and printed out the TN. KEM is equal to 1 but cannot find AOM?

On the expander it says i00v138 v115. Is it working? How do I program these keys?

 

[amlancaster]

Reading the NTP it mentions a 1140 needs a KEM3. With KEM3 the expander starts at key 68 but on the print out I only get up to key 67. Any ideas?

 

[guycable2]

On an 1140 the CLS has to have KEM3 there is also a KEM entry in just after the customer entry in the station programming. You should have a KEM 1 there. Like below.

TN 192 0 01 00 VIRTUAL
TYPE 1140
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
KEM 1
CFG_ZONE 003
CUR_ZONE 003
ERL 0
ECL 0
FDN
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU 0001
LNRS 16
XLST
SCPW 3802
CLS CTD FBD WTA LPR MTD FND HTD TDD HFA CRPD
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
VOLA VOUD CDMR ICRD MCDD T87D KEM3 MSNV FRA PKCH

 

[amlancaster]

See below print out of extension. I have KEM 1 and CLS KEM3. I only see up to key 67. In the NTPs it says it should start at 68.

REQ PRT
TYPE: 1140
TN   228 0 00 02
DATE
PAGE
DES
MODEL_NAME
EMULATED
KEM_RANGE

DES  1140VO
TN   228 0 00 02  VIRTUAL
TYPE 1140
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
KEM  1
CFG_ZONE 001
CUR_ZONE 001
ERL  0
ECL  0
FDN
TGAR 1
LDN  NO
NCOS 4
SGRP 0
RNPG 0
SCI  0
SSU
LNRS 16
XLST 0
SCPW 1111
SFLT NO
CAC_MFC 0
CLS  TLD FBD WTA LPR MTD FND HTD ADD HFA CRPD
     MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
     POD DSX VMD SLKD CCSD SWD LNA CNDA
     CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFEA RCBD
     ICDD CDMD MCTD CLBD AUTU
     GPUD DPUD DNDA CFXA ARHD CLTD ASCD
     ABDD CFHD FICD NAID BUZZ AGRD MOAD
     UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
     DRDD EXR0
     USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
     FDSD NOVD VOLA VOUA CDMR ICRD MCDD T87D KEM3 MSNV FRA  PKCH
CPND_LANG ENG
RCO  0
BFTN 228 0 00 03
HUNT
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY  00 SCR 5701 0     MARP
        CPND
          CPND_LANG ROMAN
            NAME Manager Test
            XPLN 27
            DISPLAY_FMT FIRST,LAST
     01 ADL 16
     02 ADL 16
     03 ADL 16
     04 ADL 16
     05 ADL 16
     06 ADL 16
     07 ADL 16
     08 ADL 16
     09 ADL 16
     10 ADL 16
     11 ADL 16
     12
     13
     14
     15
     16
     17 TRN
     18 AO6
     19 CFW 4  5702
     20 RGA
     21 PRK
     22 RNP
     23
     24 PRS
     25 CHG
     26 CPN
     27
     28
     29
     30
     31
KEM 1 PAGE 0
     32 ADL 16
     33 ADL 16
     34 ADL 16
     35 ADL 16
     36 ADL 16
     37 ADL 16
     38 ADL 16
     39 ADL 16
     40 ADL 16
     41 ADL 16
     42 ADL 16
     43
     44
     45
     46 ADL 16
     47
     48
     49
KEM 1 PAGE 1
     50 ADL 16  2626
     51
     52
     53
     54 ADL 16
     55
     56
     57
     58 ADL 16
     59
     60 ADL 16
     61
     62 ADL 16
     63
     64 ADL 16
     65 ADL 16
     66 ADL 16
     67 ADL 16
DATE  4 DEC 2008

 

[bignose21]

Your KEM has 18 keys on it yeh, so it starts at key 32 and if you press the shift button it starts at key 50.

 

[StoneColdphoneman]

If you still have i00v138 v115 on the add on, your phone firmware is older and you need to upgrade the phone firmware.

 

[guycable2]

Yep looks right to me. Time for the firmware upgrade.